-
Forum
-
DIscussions
-
Tech Help
-
Ercoupe/Forney Specific
-
Wing fuel tank leaks at fuel pickup
Wing fuel tank leaks at fuel pickup
16 Jan 2021 20:36 #1
by Lawson Laslo
If it still leaks you can use ezturn sealant on threads
Please Log in or Create an account to join the conversation.
16 Jan 2021 17:33 #2
by Matt Gunsch
no sealant, is used
A&P, IA, PPSEL
too many years GA and Warbird Maint
Check out the Ercoupe Discussion group on facebook
Please Log in or Create an account to join the conversation.
16 Jan 2021 10:43 #3
by Scott Monroe
Matt you mention no sealant regarding the crush fittings. How about thread sealant on the pipe threads going into the tank fitting? Thank you.
Please Log in or Create an account to join the conversation.
08 Mar 2020 12:55 #4
by Matt Gunsch
I looked thru 43.13, Cam-18 and the A&P handbooks and cannot find a listed torque for a AN775-5D Bolt, you could always use german torque, which is gootentite, ie tight enough not to leak.
A&P, IA, PPSEL
too many years GA and Warbird Maint
Check out the Ercoupe Discussion group on facebook
Please Log in or Create an account to join the conversation.
-
Kathy McMurray
-
Topic Author
08 Mar 2020 07:44 #5
by Kathy McMurray
Matt, what is the torque on the fitting? It is an aluminum fitting on an aluminum tank. Thanks.
Please Log in or Create an account to join the conversation.
07 Mar 2020 11:48 #6
by Matt Gunsch
yes, they are crush gaskets and should be replaced, if everything is correct, they will not leak, no sealing compound needed
A&P, IA, PPSEL
too many years GA and Warbird Maint
Check out the Ercoupe Discussion group on facebook
The following user(s) said Thank You: Kathy McMurray
Please Log in or Create an account to join the conversation.
-
Forum
-
DIscussions
-
Tech Help
-
Ercoupe/Forney Specific
-
Wing fuel tank leaks at fuel pickup
Time to create page: 0.055 seconds
