Breadcrumbs

Modify Elevator to Split Elevator

  • Dudley Beek
17 Feb 2023 15:48 #1 by Dudley Beek
Replied by Dudley Beek on topic Modify Elevator to Split Elevator
No, I don’t have the drawings for the modified ‘E’ elevators. What I posted was the link to Rhean original ‘C’ elevators. I prefer to use the c model and it’s limits

Please Log in or Create an account to join the conversation.

More
17 Feb 2023 13:19 #2 by Kevin Miles
Replied by Kevin Miles on topic Modify Elevator to Split Elevator
Hello Dudley,

Would you be able to share the copy of the drawings for the split elevator with me?
Thanks,
Kevin Miles
AP
N87072 415C

Please Log in or Create an account to join the conversation.

  • Clayton Eveland
  • Topic Author
28 Aug 2022 09:25 #3 by Clayton Eveland
Replied by Clayton Eveland on topic Modify Elevator to Split Elevator
Thank you

Please Log in or Create an account to join the conversation.

More
28 Aug 2022 09:10 #4 by Larry Snyder
Replied by Larry Snyder on topic Modify Elevator to Split Elevator
Great discussion. I remember a discussion I had with John Wright, Sr. about slab vs split. He and I both agreed that a slab elevator with 13° of up travel works great, and we weren’t sure why folks went to the expense of converting to a split elevator. I have to admit it’s sexy, and if your gross weight is over 1320 pounds then I would guess it’s much more important. I have nearly 2000 landings in my C model, and of all the mistakes I made, none were related to running out of elevator. My experiences are limited - thoughts?

Please Log in or Create an account to join the conversation.

  • Dudley Beek
28 Aug 2022 08:55 #5 by Dudley Beek

Please Log in or Create an account to join the conversation.

  • Clayton Eveland
  • Topic Author
28 Aug 2022 08:06 #6 by Clayton Eveland
Replied by Clayton Eveland on topic Modify Elevator to Split Elevator
Thank you everyone for your help. I search the website but I can not find the film index. Can someone direct me to it?

Please Log in or Create an account to join the conversation.

Time to create page: 0.120 seconds
Powered by Kunena Forum