ADS-B tail beacan istallation ,,on a stock 415-c tail.

Remove the entire light fixture. There are three ways to mount the TailBeacon.

1. Buy the plastic spacer from Joey Shreve or have a friend print it with a 3D printer. The spacer fills the area that held the Grimes light and holds the TailBeacon clear of the tail cone.

2. Take the Grimes cup, turn it around, and install it with longer screws. That makes a nice base for mounting the TailBeacon.

3. Wait for the uAvionix adapter. It should be out by the end of this month.

All three methods will require that the hole in the tail cone be enlarged to 29mm.